LD Systems STINGER MIX 6 A G2 - 6.5" active PA Speaker with integrated 4-channel Mixer HD

http://www.ld-systems.com/en/series/stinger-g2-series/stinger-mix-6-a-g2-6-5-inch-active-pa-speaker-with-integrated-4-channel-mixer/ LD Systems Stinger MIX 6 A G2 Active 2-Way Loudspeaker with Integrated Mixer With a built-in mixer, the compact, lightweight Stinger MIX 6 AG2 active loudspeaker is the perfect choice for small-scale PA and personal monitoring applications. It features a 6.5" woofer and 1" HF transducer with an 80 Hz to 20 kHz frequency response and 80° x 70° dispersion delivering amazing sound with clarity and punch. The integrated mixer provides a stereo line and 3 microphone channels with high and low EQ, switchable hi-Z input and phantom power plus 24-bit digital effects. It allows for connecting a wide variety of sources including MP3 and CD players, iPods, instruments and condenser mics. The output section includes a 3-band master EQ for overall tone shaping and feedback control, 4-segment LED metering, RCA recording outputs and an adjustable monitor out. The Stinger MIX 6 A G2 incorporates a Class D amplifier with 2 x 280 watts peak power and 6.3 mm TRS output to power its optional passive companion Stinger MIX 6 G2. Dual bottom and side stand mount inserts permit both vertical and horizontal setup, the latter putting the mixer controls right at your fingertips. On its own or in tandem with the passive unit, the Stinger MIX 6 A G2 provides awesome performance and versatility in an easily portable package. A transport bag, a slave speaker and a speaker stand are available optionally. Type: active Woofer Size: 6.5" Woofer Size: 165.1 mm Woofer Brand: custom made Tweeter Size: 1" Tweeter Size: 25 mm Tweeter Brand: custom made Dispersion Angle (H x V): 80° x 70° Frequency Response: 80 Hz - 20,000 Hz Amplifier: class D Amplifier Power (RMS): 2 x 70 W Amplifier Power (Peak): 2 x 280 W Max SPL: 122 dB Protection: limiter, short circuit, over voltage, overload, temperature Mixer Channels: 4 Microphone Input Channels: 3 Connector Type Microphone Inputs: XLR/ 6.3 mm jack (combo) Controls for Microphone Input Channels: EQ High, EQ Low, DFX Send, Level, Hi-Z Switch (channel 1 only) Input Impedance Microphone Input Channels: (unbalanced) 14 kOhms Input Sensitivity Microphone Input Channels: 70 mV Line Input Channels: 1 Connector Type Line Input Channels: 3.5 mm stereo jack, 2 x RCA Controls Line Input Channels: EQ High, EQ Low, DFX Send, Level Input Impedance Line Input Channels: (unbalanced) 4.4 kOhms Input Sensitivity Line Input Channels: - 5 dBu Hi-Z Inputs: 1 Hi-Z Input Connectors: 6.3 mm jack Input Impedance Hi-Z Input Connectors: 100 kOhm Monitor Line Outputs: 1 Connector Type Monitor Line Output: 6.3 mm jack (balanced) Controls for Monitor Line Output: Monitor Volume Max Output Level Line Output Monitor: 28 dBu Record Output: 1 Connector Type Record Output: 2 x RCA Max Output Level Record Output: 20 dBV Reinforced Main Output: 1 Connector Type Reinforced Main Output: 6.3 mm (min. 4 Ohm impedance) Increased power main output (