How to solution error code: E000060-0001, E000060-0002 Canon image RUNNER ADVANCE 6275, 6265, 6255. HD

6075, 6065, 6055, 8105, 8205, 8595, 8585, 8505. Code: E060-0001 Primary Charging Shutter HP close error. The Primary Charging Shutter Sensor (PS94) detects that the shutter is closed although it is moved to the open position. Remedy: 1. Check the position of the Primary Charging Shutter and the Cleaning Pad. 1-A. In the case that the Primary Charging Shutter and the Cleaning Pad fail to operate (stopped at HP at front side) 1-A-1. Check the connection of the Primary Charging Wire Cleaning Motor (M6). Motor side: J3017, J3060 (iR-ADV 8xxx)/J3160 (iRADV 6xxx) (relay), PCB side: J3177 (relay) J107 (Main Driver PCB (PCB2)) 1-A-2. Replace the Primary Charging Wire Cleaning Motor (M6). 1-B. In the case that the Primary Charging Shutter and the Cleaning Pad are stopped at rear side (close operation position) 1-B-1. Check the connection of the Primary Charging Shutter Sensor (PS94) Sensor side: J2029, J3089 (relay), PCB side: J3088 (relay), J114 (Main Driver PCB (PCB2) 1-B. 2. Replace the Primary Charging Shutter Sensor (PS94). 1-C. In the case that the Primary Charging Shutter and the Cleaning Pad are stopped along the way 1-C-1. Check the loosening of screw on the Slider Pin and abrasion of the pin. Tighten the screw or replace the Slider Pin. 1-C-2. Replace the Primary Charging Assembly. 2. Replace the Main Driver PCB (PCB2). 3. Replace the DC Comtroller PCB (PCB1). ★ ★ ★ ★ ★ ★ Code: E060-0002 Primary Charging shutter HP open error. Primary Charging Shutter Sensor (PS94) detects that the shutter is opened although it is moved to the close posiuon. Remedy: Check the position of the Primary Charging Shutter and the Cleaning Pad. 1-A. In the case that the Primary Charging shutter and the Cleaning Pad fail to operate (stopped at HP at front side) 1-A-1. Check the connection of the Primary Charging O D.AnV Rxxx/J3160 Motor side: J3017, J306U (RADY O (IRADV 6XKK) (relay), PCB SIde J51 reiay) J10/ (Main Driver PCE (PCB2)) 1-A-2. Replace the Primary Charging Wire Cleaning Motor (M6). 1-8. In the case that the Primary Charging Shutter and the Cleaning Pad are stopped at rear side (close operation position) 1-6-1, Check the connection of the Primary Charging Shutter Sensor (PS94). Sensor side: J2029, J3089 (relay), PCB side: J088 (relay), Ji14 (Main Driver PCB (PCB2) 1-8. 2. Replace the Primary Charging sShutter Sensor PS94).1-C. In the case that the Primary Charging Shutter and the Cleaning Pad are stopped along the way 1-C1. Check the loosening of screw on the Slider Pin and abrasion of the pin. lighten the slider Pin. 1-C-2. Replace the imary hargng Assemoiy. Iu. in tne case tnat the rimary cnarging snuter StOps at iront side and the Cleaning Pad moves to rear side l-D-l, Check if the Shutter Mounting Plate is deformed. f so, replace the Shutter Unit. 1-D-2. Check the looseningof screw on the Slider Pin and abrasion of the pin. Tighten the screw or replace the Slider Pin. 1-D-3. Replace the Primary Charg