How to unblock a wide format inkjet printer - dried ink on printhead HD

Buy MAGIC BULLET INKJET PRINTHEAD CLEANER from: http://www.specialistinks.com/clean-printheads.php Part 1 of 3 videos: For Part 2 CLICK HERE: https://www.youtube.com/watch?v=NPY8xyYN8HA If your wide format printer nozzle check shows interruptions in the same place each time, it is likely that either paper dust or some foreign material has found it’s way underneath your print head, and has combined with your inkjet ink to form a hard area of dried ink, which is refusing to be shifted by the wiper blade. This normally wipes the underside of your printhead clean every time you print a job. Inkjet inks on their own are usually not air drying in the normal way, and need a catalyst, like the inkjet paper coating to dry and harden - MAGIC BULLET PRINTHEAD CLEANER is formulated by chemists to break the bond between ink and catalyst, to soften and dissolve the obstruction, so you may regain a perfect nozzle check and printer function: Simply turn on your wide format printer, wait for the carriage to travel across, and get an assistant to take out the mains lead from the back - this will enable you to work on the printhead in a free position - you can move the printhead where you wish.. Get a small square of J Cloth or similar woven kitchen towel - not paper - and put plenty of MAGIC BULLET PRINTHEAD CLEANER on the towel. Lay this soaked pad next to your printhead, then move the printhead over the soaked pad. Leave your printhead for at least of few hours - even overnight - to allow the strong vapours given off by MAGIC BULLET PRINTHEAD CLEANER to do their work - The vapour will soften and dissolve to hardened ink residues which are causing you the problem. Once you have completed your soaking cycle, take out the pad and dispose of carefully, then switch on your printer. Print a small run of colour prints to allow the internal wiper blade to sweep over the underside of the printhead, then perform a nozzle check. If this nozzle check is perfect - you can start your production printing once more If the nozzle check is improved but still not perfect - repeat the soaking procedure If the nozzle check is unchanged - repeat the soaking procedure a number of times, and you might want to try putting a slightly thicker pad soaked in MAGIC BULLET PRINTHEAD CLEANER under the printhead, and move the head over the pad left and right, left and right a few times, to ‘scub’ the printhead safely. - Repeat this until you get results! Check your print accuracy with our FREE CALIBRATION PRINT with same image as JPEG download at: https://www.marruttusa.com/printer-maintenance/inkjet-printer-purge-files.php