Glideaway Comfort Base Lifestyle Base Instructions HD

Thank you for purchasing a Grand Comfort Base. Proper set-up will ensure the longevity of your Comfort Base. This will be a short how-to video to guide you through the proper set-up. Make sure at least two people are available to carry and set up the base. Keep the base in the carton during delivery and do not remove until ready to set-up. Carry the base to the area that it will be set up and lay the carton flat, correct side up. To avoid damage to the base, only remove the base from the carton while it is laying flat. Remove the top lid of the box. Remove the accessory boxes from the bottom of the base. Before discarding any packing materials, check the adjustable base shipping carton and verify the following items are included: (1) Foot Mattress Retainer (4) Legs (1) Remote Control (1) AC Cord (1) Power Supply (1) DC Power Cord (1) Sync Cable (Twin XLs only) (3) AAA Batteries (2) 9V Batteries (1) Manual Carefully lift the base frame from the shipping carton, keeping the unit topside-down. Remove the plastic wrapping from the bottom to access the base. Insert one end of the DC cord into the power supply. Insert the other end with the locking clip into the Control Box. Lock the Control Box using the locking clip. Insert the AC cord into the power supply. Note: Do not plug the base into the AC outlet or power strip yet. Insert the legs into the threaded holes at each corner of the base by inserting the leg and rotating clockwise until tight. Note: If setting two Twin XL’s bases to use with one king size mattress, connect the Sync cable to the control box (as pictured) to one base. After bases are arranged, connect the second Sync Cable to other base’s control box. Finish removing the plastic packaging from the base to orient into final position. Carefully rotate the base on its side, then lift and place on legs. Note: Do not lean the bed against the installed legs to turn over. Untuck the retainer clip (attached to the string) from the retainer bar bracket at the foot of the base. Slide in the mattress retainer bar in the correct upright position. Replace the retainer clip securely. Lift the battery cover and insert the three AAA size batteries (included) into the remote. Replace the battery cover. Remote is already linked with the base. Test the remote to make sure it is operating properly. Turn the power supply upside down to access the battery cover, then slide the battery cover off. Insert the two 9V batteries (included) into the compartment and slide the cover back on. Insert AC plug into an AC outlet having100-240V AC, 50/60Hz or a power strip. Place the mattress on the base. Enjoy your new Comfort Base. Please call or email the Comfort Base Customer Service if you have additional questions. 1-855-581-3095 comfortbase@glideaway.com