the best material for home construction 1 HD

The best material to build a house Two types of houses in comparison Construction costs and current costs House with inertia and non-inertia houses - Advantages and disadvantages The best material for the construction of the house is such a feel comfortable and where construction expenditures are balanced with a current expense in the living. Build a house in which to feel good, or the disability to live as the selected material is not suitable for you. You varast build a cheaper house and then pay expensive monthly costs. This time, talking about two types of homes, houses with inertia and home without inertia. It is also called Thermal Mass Houses with inertia is much heavier than without inertia home. They are constructed of brick, blocks, concrete, solid wood. House without inertia is built of wood or metal studs and filled with insulation material. House with inertia is one which is able to accumulate heat or cold inertia (thermal mass) and later return. The same applies to humidity. When humidity is too large house accumulates moisture and dry weather when the humidity is below it shall be returned. Build a house without inertia can be much faster than the inertia of the house. Build a house without inertia is about 1/3 cheaper, but running costs 1/3 more expensive, and house with inertia. Inertia house PERFOR good natural ventilation, since a long time remain in the temperature difference between inside and outside the home. Every house requires good ventilation. Without it, you can not normally feel and you start to suffer. The house without the inertia of natural ventilation practically does not work and need forced ventilation. This means that the need for additional winter heating and summer air conditioning. These are additional costs for electricity, especially heating and cooling. The house without the inertia installed good recuperation system, which pays between $ 6000- $ 10000 is an additional expense. It is a system to recover heat. Exhaust air heat warms the incoming air and thus little heat is recovered, but you have to pay extra costs for electricity and heating. Without inertia home heating and cooling accumulation may reach out to finished an array of floor heating system throughout the floor area as well as a home in the middle of setting up a fireplace, stove with a brick chimney. Since we make massive elements which will accumulate temperature. Inertia outer wall of the house is a massive, massive floors and partitions it works as a good temperature of the battery, which smooths rapid changes in temperature. I selected an array of wall inesces house (brick, block or solid wood) with external insulation, where the interior of the house should be a lot of wooden elements: floor, furniture, windows, stairs. This will help to regulate the level of humidity in the room. https://www.youtube.com/watch?v=1-TrFIcxPjU Such a brick wall to be insulated from the outside only to remain insid