Restore Guide For JynxBox M1 and M1v2 HD

Hi Guys, This is a quick video explaining how to restore your box back to the state it was when you first received it. There are a couple of steps you need to follow before you watch the video, which are listed below: 1. Create a folder on your USB called Kodi and copy the files from link below into the Kodi(Choose either M1 or M3 depending on the box you have, M3 box has JynxBox M1v2 on the front) folder on your USB drive: 2. http://www.jynxbox.eu/jynx_files/M1 3. http://www.jynxbox.eu/jynx_files/M3 4. Turn the unit over and locate the small hole to the left of the raised section. You will need a toothpick or something similar to press the button that is inside. 5. Pull out the power cable and make sure you have your USB stick plugged in, press in the reset button with the toothpick and while still pressing this in plug back in the power cable and wait until you see a green robot appear on the screen, you can then release the reset button. 6. On this screen you need to choose Wipe data/factory reset then Wipe Cache and Wipe Media if that option is available. Once that is completed you need to choose “update image” and then select your USB (may show up as udisk or similar) then select the Kodi folder and then the file pivos-m1-update.img or the_hydra-linux-Kodi-14.0-m3-working.img depending on the version of the box you have and it will start to reflash. You can now follow the remaining steps in the video. I hope this helps.