Valiant Barracuda Dart Push Button Bulb Replacement Real Time

Replacing the Push Button Bulb real time. Step by Step instructions & Tool List: Tools: 3/32 Allen Wrench Mopar Dash Switch Bezel Tool - (Found it on eBay) 2 Awls or Very Small Slotted Screwdrivers Phillips Screwdriver 3/8" Hose - about 5" - 7" Remove Wiper Set Screw - w/Allen Wrench Remove Wiper Nut - w/Mopar Dash Bezel Tool or with Awls or Small Screwdrivers Under dash push button to release Light Switch Knob Remove Light Switch Nut - w/Mopar Dash Bezel Tool or with Awls or Small Screwdrivers Remove Set Screw on Parking Lever -w/Allen Wrench Remove 2 Screws on Bezel Remove Felt Remove Drive Button D - Pull straight out Use 3/8 Hose to Remove Bulb - it wont slide completely over bulb - Reverse Steps: Replace with New Bulb Install Drive Button D Install Felt Install Bezel & 2 Screws Install Parking Lever & Tighten Set Screw Install Nut on Wiper Switch and Knob with Set Screw Install Nut on Light Switch Press button under dash while inserting Light Switch Knob to engage Check light Check out my other Video: Dash & Pushbutton LED http://youtu.be/qYMfdb-v4HQ