Place Bar Bending Schedule HD

Bar Bending Schedule / Place BBS 1. Selecting this Menu will display the Bar Bending Schedule Screen. Select the Report format in which the BBS to be placed. 2. BBS can be placed for Straight Bars and Bend Bars separately or combined together, as per the settings of Reports in Job Preferences. 3. Enter the details relevant to the Header and Footer of BBS. 4. BBS can be placed based on Alpha code, or Member Name based on the option selected. This is only optional. 5. Length of the BBS to be placed on the drawing can be controlled based on the selected option, Page based or No. of Rows or Container based. If the actual number of rows of the BBS created exceeds the selected choice, then the second sheet of BBS can be placed automatically, if Automatic Point selection is selected. Enter the Offset Distance between the sheets to place the second sheet. 6. If none option is selected, then the entire BBS will be placed as single table. 7. BBS can be for Selected Bars / Callouts using Select Objects or for the Bars inside the Selected Fence or for the Bars selected using Filter, or for All Bars by selecting Place Report directly. 8. While Placing the BBS, Quantity and Bar Mark audit will be done and BBS cannot be placed twice for the bars. 9. If varying bars to be excluded from the BBS, then uncheck the option Include Varying Bars. If this option is selected, then details of Varying Bars will also be included in the BBS.