Italeri 1:72 Panzerkampfagen Pz.kpfw II ausf.F

ArmorThe Panzer II was designed before the experience of the Spanish Civil War of 1936-39 showed that shell-proof armor was required for tanks to survive on a modern battlefield. Prior to that, armor was designed to stop machinegun fire and High Explosive shell fragments.Panzer II and Panzer I on western front (May 1940)The Panzer II A, B, and C had 14 mm of slightly sloped homogenous steel armor on the sides, front, and back, with 10 mm of armor on the top and bottom. Many IIC were given increased armor in the front. Starting with the D model, the front armor was increased to 30 mm. The Model F had 35 mm front armour and 20 mm side armor.This armor could be penetrated by towed antitank weapons such as the Soviet 45mm and French canon de 25 and canon de 47.ArmamentMost tank versions of the Panzer II were armed with a 2 cm KwK 30 55 calibers long cannon. Some later versions used the 2 cm KwK 38 L/55 which was similar. This cannon was based on the 2 cm FlaK 30 anti-aircraft gun, and was capable of firing at a rate of 600 rounds per minute (280 rounds per minute sustained). The Panzer II also had a 7.92 mm Maschinengewehr 34 machine gun mounted coaxially with the main gun.The 2 cm cannon proved to be ineffective against many Allied tanks, and experiments were made towards replacing it with a 37 mm cannon, but nothing came of this. Prototypes were built with a 50 mm tank gun, but by then the Panzer II had outlived its usefulness as a tank regardless of armament. Greater success was had by replacing the standard armor-piercing explosive ammunition with tungsten cored solid ammunition, but due to material shortages this ammunition was in chronically short supply.Later development into a self-propelled gun carriage saw the mounting of a 5 cm PaK 38 antitank gun, but this was seen as insufficient for the time, and the larger 7.62 cm PaK 36(r) was installed as an effective stop-gap. The main production antitank version was fitted with a 7.5 cm PaK 40 which was very effective. Artillery mounting began with a few 15 cm sIG 33 heavy infantry guns, but most effective was the 10.5 cm leFH 18, for which the Panzer II chassis became the primary carriage for the war. Most of these versions retained a pintle mounted 7.92 mm MG34 machine gun for defense against infantry and air attack.MobilityAll production versions of the Panzer II were fitted with a 140 PS, gasoline-fuelled six-cylinder Maybach HL 62 TRM engine and ZF transmissions. Models A, B, and C had a top speed of 40 km/h (25 mph). Models D and E had a Christie suspension and a better transmission, giving a top road speed of 55 km/h (33 mph) but the cross country speed was much lower than previous models, so the Model F reverted back to the previous leaf spring type suspension. All versions had a range of 200 km (120 mi).