Automatic Blind Controller Assembly HD

A brief assembly video for my self designed and 3D printed automatic blind controller. Uses an Arduino nano and RF switch. Further details and videos to follow, in the meantime please post any questions in the comments below. 3D designs available via thingiverse: https://www.thingiverse.com/thing:2631414 As well as the 3D printed parts, you will need the following items: 1 x L298N 2 Channel DC Motor Driver https://www.banggood.com/Dual-Channel-L298N-DC-Motor-Driver-Board-PWM-Speed-Dual-H-Bridge-Stepper-Module-p-1162946.html?p=KF2715792233201409DJ 1 x DC 12V Worm Gear and Motor (10-50 rpm) https://www.banggood.com/DC-12V-356065110220rpm-Worm-Gear-Box-Reduction-Motor-p-1197020.html?p=KF2715792233201409DJ 1 x Arduino Nano https://www.banggood.com/ATmega328P-Nano-V3-Controller-Board-Compatible-Arduino-p-940937.html?p=KF2715792233201409DJ 2 x DC Female Jacks https://www.banggood.com/10pcs-5_5-x-2_1mm-DC-Power-Supply-Female-Jack-Socket-p-1062018.html?p=KF2715792233201409DJ 1 x IC2262 RF Transmitter/Reciever (433/315MHz depending on country) https://www.banggood.com/IC2262-2272-M4-4-Channel-Wireless-Remote-Lock-Receiving-Board-With-Remote-Control-p-1031857.html?p=KF2715792233201409DJ 1 x Small PCB Board https://www.banggood.com/40pcs-FR-4-Double-Side-Prototype-PCB-Printed-Circuit-Board-p-995732.html?p=KF2715792233201409DJ 1 x 12V DC PSU Various M3 Bolts Ribbon Cables and Dupont Connectors 1 x Yellow LED 1 x Green LED 2 x Plastic Square Buttons 6/7 Resistors 1 x Photo Resistor (Optional)