Eachine Wizard X220S - Unboxing & Review HD

Maiden Flight & Final Thoughts: https://youtu.be/7D-zZXtMXE0 ARF Version: http://bit.ly/2vFWyif RTF: http://bit.ly/2tHvvGX Top Plate: http://bit.ly/2h0POcy Runcam 3: http://bit.ly/2r45Pm3 Betaflight Default Settings Dump File: http://txt.do/dqp4v Eachine Wizard X220S FPV Racer Omnibus F4 5.8G 72CH VTX 30A Dshot600 2206 2300KV 800TVL CCD ARF Description: Eachine Wizard X220S: Wheelbase: 220mm Frame arm: 4mm light material Weigh: 356g (without battery and camera mount) Take off weigh: 561g Use light composite material. 4mm thickness and 15mm width frame arms, the width is 10mm less than Eachine Wizard X220. Frame kit with camera angle scale and 30° camera mount for Runcam 3 Gopro session. Anti-vibration sponges to protect the racer frome crashing. Eachine MN2206 2300KV motor KV: 2300 Max thrust: 1100G Length: 35MM NO.OF cell: 3-5S Diameter: 28MM Framework: 12N14P Shaft: 3MM Propeller: 5 inch Weight: 28g Eachine 30A BLHELI_S 4 in 1 ESC Con. current: 30A Peak current (10S): 35A Input voltage: 2-5S BEC: 5V output Programming: YES Firmware: blheli_s Weight: 28g Size: 36*36MM Eachine 1179 800TVL CCD camera Color: purple Sensor: CCD Resolution(horizontal center): 800TVL Shell size: 25mm*25mm Weight: 11g Resolution: PAL: 1980H×1080 (2MP) Format: PAL Video output: 1.0Vp-p/75Ω Automatic gain control: 0.25/0.50/0.75/1.00 adjustable, up to 55dB. AWB: ON/OFF Exposure mode: electron exposure Electronic shutter: 1/50(1/60) - 1/100000 S Gamma correction: 0.45/1.0 Synchronization method: internal synchronization Lens: standard 2.8mm lens Working voltage: DC12V (Wide Voltage, measured that can be work in 5-13V) Workig current: 70mA (low power consumption) Workig temperature: -20℃--60℃ Humidity: 0%~98% Strong backlighting effect 5.8G 72CH 25MW 200mw 600MW switchable transmitter Video Format : NTSC/PAL Channel: 72CH Operating Temperature : -10~85℃ Connector: RP-SMA Female Antenna connector: RP-SMA Male Omnibus F4 V3 flight controller Size: 36x36mm Mount holes: 30.5x30.5mm STM32 F405 MCU, Runs Betaflight 3.0.1 firmware, could run faster loop time. Using F4 MCU controls OSD over SPI bus in DMA mode. OSD Configation has been included in Betaflight GUI. SBUS/PPM input (Pinheaders) 6PWM output (1-4Pinheaders and Sh1.0 Plug, 5-6 as Pinheaders) NO BARO SPI Sensor MPU6000 Included 128Mbit Flash, please always use BEC for the FC. Supported by BETAFLIGHT and dRonin Eachine 5051 3-blade propeller Color: purple Quantity: 10 Pairs Mounting Hole: 5mm his is the ARF version that comes without battery, charger, receiver and remote control. Package included: 1 x Eachine Wizard X220S frame kit 2 x 2206 2300KV motor CW 2 x 2206 2300KV motor CCW 1 x Eachine 30A BLHELI_S 4 in 1 ESC 1 x Omnibus F4 V3 flight controller 1 x 1179 800TVL camera 1 x 5.8G 72CH 25MW 200mw 600MW switchable VTX 10 x Eachine 5051 3-blade propeller purple CW 10 x Eachine 5051 3-blade propeller purple CCW 1 x 30° Camera Mount(For Runcam3/Gopro session) 1 x Pagoda antenna 2 x Battery st