Restoration Scrub planer (Restauracija Scrub renda) HD

The SCRUB PLANE is a type of plane used to remove large amounts of wood from the surface of lumber, such as when eliminating cup or twist in the first stages of preparing rough stock, or when reducing the thickness of a board significantly. Scrub planes generally have a short soles, a relatively narrow but thick blade, a very wide mouth, and a deeply curved edge (of about a 3 inch radius) to make a deep, gouging cut. A scrub plane is generally used in diagonal strokes across the face of a board, rather than parallel to the length of the board (along the grain) as with most other bench planes. In thicknessing or preparing rough stock, the scrub plane is usually followed by the jack plane, jointer plane, then smoothing plane. Its function in modern woodworking has been largely replaced by power tools such as the thickness planer. A scrub plane can still be useful for planing boards too wide to fit through a thickness planer. Dobio sam ovo rende od mog dobrog prijatelja i kolege Predraga Vidanovica. Kaze da ga je kupio njegov pokojni otac 90-tih kada su po Srbiji prodavali raznu robu rusi, bugari, madjari i ne znam ko jos ne. Elem rende stajalo na suvom, nije korisceno, suvo kao barut, lepak ispario, tako da rucice ispadaju, ali evo uradio sam rekonstrukciju, a jos i saznao dosta o ovom veoma retkom alatu. Rende sluzi za grubo i veliko skidanje materijala na dasci ili gredi. Najbolje rezultate postize kada skidanje ide ukoso ili cak popreko od pravca pruzanja teksture drveta. Veoma je korisno na terenu, kada treba suziti dasku po duzini ili ispraviti dasku ili gredu koja je upredena.