CHEAP Antenna! Wire Antenna | Semoic Balance Unbalance 10W Balun 9:1 HD

As an Amazon Associate I earn from qualifying purchases. This cheap Antenna: https://amzn.to/35bmbst Bioenno Solar Panel: https://amzn.to/2BUZMmC Bioenno Battery 12V,12Ah: https://amzn.to/2BUibjB My favorite ham gear: Sling Shot 4 tree antenna: https://amzn.to/2SRCDZT Arborist Throw Box: https://amzn.to/2SSwJr8 Throw Bag2: https://amzn.to/2BVfNt1 Tree Antenna Weight: https://amzn.to/2Fvj6dS Books: ARRL Handbook 2018: https://amzn.to/2MJIkGR ARRL Ham Radio Lic Manual: https://amzn.to/2WyzKze Easy Technician Class: https://amzn.to/2MNwSKd Easy Extra Class: https://amzn.to/2G5Jufk Easy General Class: https://amzn.to/2UvwbI8 You use a non-resonate length of wire for the driven elements, typically 41′, 35.5′, or 29′, and optionally a 1/4 λ wire for a counterpoise, 35′ length counterpoise works well for all bands. It is designed to wind the attached wires onto the device to store it as a small compact unit. This antenna will require the use of a tuner. The autotuners in the Elecraft KX-2, KX-3, Icom IC-703, and our manual Multi Z Tuner have all been tested and work very well. The antenna has optimum efficiency at 20m and will be an S unit less in performance at the 40m and 10m ends. We provide all the components except the antenna wire and counterpoise wire. You use what you have available. We recommend anything from 20awg to 26awg. Two holes are provided for you to tie down or suspend the device depending on your circumstances. compact portable wire antenna for backyard or portable SOTA use. It uses an integral 9:1 voltage balun that matches your unbalanced 50 ohm impedance input to a 450 ohm impedance unbalanced long wire. It will easily handle 10 watts. We provide all captive stainless steel hardware for the antenna and counterpoise connections. There is a board mounted female BNC for connection to your tuner. On a difficulty scale of 1 to 5, 5 being the most difficult, this is rated at 2 or 3 depending on your experience