Extreme Testing - Foxeer ClearTX 2 Flight Review!!! (01.03.2019) HD

Extreme Testing - Foxeer ClearTX 2 Flight Review - The new Foxeer ClearTX 2 adds some new features like smart audio, has more power options 25mw,200mw, 500mw and max power to 800mW The Foxeer ClearTX 2 has a ramp up feature where power increases for the first 10 seconds the vtx is powered on to avoid interference with nearby pilots when you power up your drone. The Foxeer ClearTX 2 is better cponfigured to handle near by signal interference and locks those frequencies out as it locks on to you selected frequency. This video features more extreme testing as for distance and multipath environments. Normally for racing in MultiGP or similiar leagues, it performs very well against the competition in that environment. Upgrade Version: This Foxeer ClearTX2 is updated based on the former Foxeer ClearTX. Added Remote control function: Setup through Betaflight by connecting Uart port to FC Strong Anti-Interference Function: Amazingly clean filtering,great interference rejection ability and RF design enable 8 pilots racing simultaneously,no ripple even at full throttle. Long transmission distance and stable performace Accurate Frequency Locking: Optimized algorithm effectively enhance frequency locking ability, refuse frequency drift, minimize adjacent channel interference Drive 500mA Load: Stable 5v power output, 5A@500mA, better adapts to the camera with power requirements, can drive larger loads Factory Mode & Safe Switch: You can adjust power to any level after entering Factory Mode. While powering on or switching channels, power slow ramps up at first 10s prevent causing interference Foxeer Link: http://foxeer.com/Foxeer-ClearTX-2-58G-48CH-Remote-Control-VTx-g-212?u=510 Amazon: https://amzn.to/2VxNPfE Specification: Brand: Foxeer Size: 22mmx32mm Connector: MMCX Display: 9LED Weight: 6.3g Power: 25/200/500/800mW Input: 2~6S Output: 5v Channel: 48CH including raceband Remote control: Uart Features: -Accurate frequency locking Optimized algorithm effectively enhance frequency locking ability,refuse freqency drift,minimize adjacent channel interference. -interference free Excellent power solution and RF design enable 8 pilots racing simultaneously,no ripple even at full throttle. -Remote control Setup VTx through Betaflight by connecting Uart port to FC. -Drive 500mA Load Stable 5v power output,5v@500mA,better adapts to the camera with power requirements,can drive large loads. -Factory Mode You can adjust power to any level after entering Factory Mode. -Safe Switch While powering on or switching channels,power slow ramps up at first 10sec to prevent causing interference. Package included: 1 x Foxeer ClearTX 2 5.8G 48CH Remote Control VTx FPV Transmitter International Version Note: not include the antenna Pappo links: https://www.instagram.com/papofpv/ :Pappo Youtube: https://www.youtube.com/channel/UCtMpre-LPx06UHBhEh9kl2Q #Foxeer #ClearTX2 #FPVVTX #FPVRacing #FPVFreestyle #FPVDrone My Links Please Subscribe! http://www.youtube.com/sub