Lowering your M3 / M4 (lowering springs DIY) HD

In this video we will show you how to lower your M3/M4 by installing lowering springs. Torque Specs Specs and Bolt Information: Front Suspension: Plastic Shroud Bolts - 10mm - ¼ Turn Carbon Brace Bolts - 13mm - 12 ft.lbs. Carbon Brace to Coolant Tank Bolt - 10mm - Snug (A) Aluminum Brace E-Torx Bolts - 9mm - 25 ft.lbs. (B) Aluminum Brace E-Torx Bolts - 10mm - 30 ft.lbs. (C) Aluminum Brace Cowl Bolts - 16mm - 35 ft.lbs Strut Hat Bolts - 13mm - 25 ft.lbs. Strut Spindle Nut - 18mm-12pt - 25 ft.lbs. Strut Pinch Bolts - 16mm - 60 ft.lbs. Sway Bar End Links - 16mm/T30 - 44 ft.lbs. Headlight Leveling Sensor - 10mm - Snug Rear: Lower Strut Bolt - 18mm - 74 ft.lbs. Eccentric Bolt - 21mm/18mm - 74 ft.lbs. Headlight Leveling Sensor - 10mm - Snug Lug Bolts for M3 - 140Nm / 105 ft.lbs. Disclaimer: We are NOT professionals and therefore cannot guarantee against improper use or unauthorized modifications of this information. SCE assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. We always recommend safe practices when working on vehicles and or with tools in general. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not SCE.