HCigar Clone - Caravela Mechanical Mod [Unboxing 4K UHD Macro] HD

HCigar Clone - Caravela Mechanical Mod [Unboxing 4K UHD Macro] Where to purchase (affiliate link): eBay: https://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&toolid=11800&pub=5575244856&campid=5337989659&mpre=http%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_odkw%3Dsmpl%2Binfinite%26_sop%3D12%26_osacat%3D0%26_from%3DR40%26_trksid%3Dp2045573.m570.l1313.TR0.TRC0.H0.Xhcigar%2Bcaravela.TRS0%26_nkw%3Dhcigar%2Bcaravela%26_sacat%3D0 Hello everybody, Featured in this video, is a mech-mod I recently acquired - the Caravela clone from HCigar. This is an excerpt from my previous and first mechanical-mod video (https://youtu.be/l3J2gMRCBXQ). But, the same description applies to this mech-mod: “First, although I have always been very interested in and attracted to mech-mods (mainly for their super clean aesthetics and sexy appearance), I’ve also always been very wary and cautious of their safety because they completely lack any sort of battery safety at all (eg: protection from hard-shorts, protection from low resistance, protection from over-discharge, etc.). So, I was actually never planning nor intending to buy any mechanical-mods at all. But, since these new ridiculously unjust and crazily over-regulated FDA Deeming Regulations were published recently (which are set out to obliterate the vaping/e-cig industry and market), I thought to myself I had better start collecting and stocking-up on devices that will stand the test of time and that can last, literally, for hundreds of years - specifically, mechanical mods and RDAs, which are compromised of almost 100% solid metal. Since mechanical mods do not use any electronics whatsoever (PCB boards, discrete circuits (capacitors, resistors, etc.), micro-chip processors, PCB trace leads, wires, solder joints, etc., etc.), then there are absolutely no electronics within it that can ever break, pop, blow, corrode, rust, crack, etc., etc. And, as long as you don’t store these mods in salt-water at the bottom of the ocean, keep it buried in a rain forest or leave it under the desert sun, then these mech-mods should last you well beyond your lifetime - a few hundred years at least. The same thing and a similar point can be said for RDAs - there is no glass to break (no need to worry about sourcing glass tubes with the exact precise fitment) and there is no need to worry about sourcing a particular company’s pre-built “stock-coils” (which might become extinct, or very rare, under the new FDA Deeming Regulations). RDAs will only require steel wire, cotton and the very seldom o-ring replacement, to keep them going and working for hundreds of years (and those raw materials are easily found and commonly used in many, many other various industries).” Just like the Infinite clone of the 4nine from my previous video, this HCigar clone mod is also very well made. The fit and finish is of exceptional quality. All of the threads are smooth and all of the pieces fit together nice and flush. I like the locking mechanism