Train Simulator 2017: CSX C30-7 Startup HD

Startup procedure as stated in the manual. 1). Move the Engine Control switch to the “Start/Isolate” position. Close the following breakers on the rear control panel: Fuel Pump, Excitation, Local Control, Control, Dynamic Brake. Close the following breakers near the toilet: Inverter, Charging Circuit, Inverter Control Circuit. Then close the three switches on the Control Stand. Gen Field, Fuel Pump, and Control. Open the engine doors and press the pre-lube/Prime button. Takes a about a minute of holding. Then the start light will illuminate. Press start for about 2 seconds. Then turn the isolation switch to Run. If done correct, no alarm bells will ring. If not, then a bell will sound and the engine will shutdown.