Elecraft AX1 Portable QRP Antenna for KX2 ~ Unbox Test Review HD

I make a small commission for purchases made through the following links. My mosquito repel setup: Thermacell Mosquito Repel: https://amzn.to/2EYKf7T Holster: https://amzn.to/2I4xiLN 48 Hour pack: https://amzn.to/2KAoUVP Portable Speaker w/ Volume Control: https://amzn.to/2Xx81zd Portable Speaker: https://amzn.to/2VNK2v4 Bioenno Solar Panel: https://amzn.to/2BUZMmC Bioenno Power Pack: https://amzn.to/2AopQ9O Bioenno Batt 12V,12Ah: https://amzn.to/2BUibjB Bioenno Batt 12V,20Ah: https://amzn.to/2Rqbpfg Multi Volt Meter: https://amzn.to/2VXmxDD Ham Books: ARRL Handbook 2018: https://amzn.to/2MJIkGR ARRL Ham Radio Lic Manual: https://amzn.to/2WyzKze Easy Technician Class: https://amzn.to/2MNwSKd Easy General Class: https://amzn.to/2UvwbI8 Easy Extra Class: https://amzn.to/2G5Jufk Using the AX1 with an ATU eliminates tedious length adjustments. Just select a band, tap the antenna tune switch, and go for it. The AX1 is resonant on 20 meters in one switch position, while the other is designed for efficient 17 and 15 meter matching using an ATU. Whether you use the AX1 as a ‘stealth’ field antenna, for pedestrian mobile, or as a versatile backup, it’ll be ready when you are. Resonant Frequencies 20 m (~14 MHz) and 17/15 m (~19 MHz). Resonant frequencies may vary +/- 300 kHz or more due to changes in terrain, body capacitance, and antenna height. Supplied Radial Wire 13 feet (4.0 m) long. Wire has pre-installed lug for attachment to the transceiver’s ground screw. Max. Power 30 Watts. If RFI symptoms are observed, reduce power or move antenna farther from the transceiver. Construction Corrosion-resistant whip and hardware; Lexan outer tube; high-Q inductors wound with 20 AWG, high-temp enamel wire. Dimensions Whip: 6” (15 cm) collapsed, 45” (115 cm) extended. Base: 6” (15 cm) long x 0.75” (19 mm) diameter. Weight Antenna: 3.2 oz. (90 g); supplied radial wire: 0.6 oz. (17 g).